How to set the minimum SoC battery (Load First mode) on the inverter display?

• Go to the main menu (double press ESC).
• Go to settings (hold down the OK button for about three seconds).
• Use the arrows to locate PRIORITY in the settings and press OK.
• Use the arrow keys to locate Load First mode and press OK.
• Then select the Stop SOC value in % at which to stop the battery discharge in Load First mode (in summer we recommend 10 - 15%, in winter we recommend 40%), after selecting the appropriate value, confirm with OK button.
• After confirmation, a message is displayed Set OK ! 

 

 

Po potvrzení se zobrazí zpráva